Main product

Overview


DIGITUS® wall-mounted enclosures are manufactured, designed and developed to meet the high demands of IT infrastructure.

- Slim housing for installations where space is limited
- Door stopper mechanism allows installation in any direction on the wall, ceiling or raised floor
- 3U rotatable profile rail at the front, 2U fixed profile rail at the rear
- Pre-punched cut-outs for cable routing and fastening cable ties
- Punched-out mounting holes throughout the lower housing area for fixing a wide variety of components
- Load capacity for the installation of components: 30 kg

The SOHO, Slim wall-mounted enclosures are ideal for housing active and passive components. They are characterized by simple and time-saving installation. The modern design fits into any office or home. The enclosure has 2 separate installation options: A rotatable vertical 3U rail is attached to the front. Alternatively, this can also be positioned horizontally or at an angle. A horizontal 2U rail is attached to the rear (fixed), which can be used for passive network components, for example. The punched-out mounting holes in the entire lower housing area also allow components that are not 483 mm (19") compatible to be installed (e.g. DSL routers, etc.).




At-a-glance


  • 1-point four-point locking

  • 2 separate 483 mm (19") installation options: 3U vertical (rotatable), 2U horizontal (fixed)

  • 2.0 mm thick sheet steel with a high load-bearing capacity, powder-coated

  • Area for cable ties

  • Fan mount dimensions: 57.5 x 57.5 mm

  • Hole spacing for fan mounting: 50 x 50 mm (3.5 mm diameter)

  • Lockable housing with transparent polycarbonate pane

  • Lower housing area with punched-out mounting holes for mounting equipment that is not 483 mm (19") compatible

  • Max. installation depth (from front vertical rail to rear wall stop): Approx. 355 mm

  • Max. installation depth (from front vertical rail to stop on rear horizontal rail): Approx. 265 mm

  • Mounting plate is optionally available

  • Pre-punched cut-outs for cable routing

  • Protection class IP20

  • Steel door stop mechanism keeps the door open

  • Upper part of the housing can be opened up to 80°

  • Ventilation slots for active and passive ventilation




Reasons to buy

  • 1-point four-point locking
  • 2 separate 483 mm (19") installation options: 3U vertical (rotatable), 2U horizontal (fixed)
  • 2.0 mm thick sheet steel with a high load-bearing capacity, powder-coated
  • Area for cable ties
  • Fan mount dimensions: 57.5 x 57.5 mm
  • Hole spacing for fan mounting: 50 x 50 mm (3.5 mm diameter)
  • Lockable housing with transparent polycarbonate pane
  • Lower housing area with punched-out mounting holes for mounting equipment that is not 483 mm (19") compatible
  • Max. installation depth (from front vertical rail to rear wall stop): Approx. 355 mm
  • Max. installation depth (from front vertical rail to stop on rear horizontal rail): Approx. 265 mm
  • Mounting plate is optionally available
  • Pre-punched cut-outs for cable routing
  • Protection class IP20
  • Steel door stop mechanism keeps the door open
  • Upper part of the housing can be opened up to 80°
  • Ventilation slots for active and passive ventilation

Specification

Technical Description: Digitus Wall-mounted enclosure - SOHO, Slim
Features
International Protection (IP) code:The IP code classifies and rates the degree of protection provided against the intrusion (including body parts such as hands and fingers), dust, accidental contact, and water by mechanical casings and electrical enclosures. It is published by the International Electrotechnical Commission (IEC). The digits (characteristic numerals) indicate conformity with the conditions summarized in the tables below. Where there is no protection rating with regard to one of the criteria, the digit is replaced with the letter X. an electrical socket rated IP22 is protected against insertion of fingers and will not be damaged or become unsafe during a specified test in which it is exposed to vertically or nearly vertically dripping water. Another example is the Sony Xperia Z Ultra, one of the first cellular phones to be IP-rated; it is rated at IP58 and marketed as "dust resistant" and can be "immersed in 1.5 meter of freshwater for up to 30 minutes".
IP20
Side panels included:Indicates if the side panels are included or not
Yes
Front door construction:
Glass
Material:The material from which a thing is or can be made e.g. wood, plastic.
Metal
Product colour:
Black
Maximum weight capacity:The maximum weight that the product is designed to hold/store.
30 kg
Type:Characteristics of the device.
Wall mounted rack
Rack capacity:The spase that device fill in rack.
3U

Logistics data
UK Trade Tariff code:
94032080
Country of origin:Country where the device is made.
Turkey
Harmonized System (HS) code:
85381000

Packaging data
Package weight:Weight of the packaged product.
9.5 kg
Package volume:
42400 cm³
Package depth:The distance from the front to the back of the packaging.
500 mm
Package width:The distance from one side of the packaging to the other.
530 mm

Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
8.5 kg
Height:The measurement of the product from head to foot or from base to top.
145 mm
Depth:The distance from the front to the back of something.
475 mm
Width:The measurement or extent of something from side to side.
525 mm
Size (imperial):
48.3 cm (19")

Product details

DN-19 04U-PB-B Digitus 4016032345282

Digitus Wall-mounted enclosure - SOHO, Slim

£210.86 and In stock

SKU: DN-19 04U-PB-B

Digitus Wall-mounted enclosure - SOHO, Slim

Quick Code: Q3079347 MPN: DN-19 04U-PB-B

You need to be logged in to see Prices

Log In For Prices
Dont have an account? Contact Us

Key Features

  • Protection class IP20
  • Upper part of the housing can be opened up to 80°
  • Steel door stop mechanism keeps the door open
  • 1-point four-point locking
  • Pre-punched cut-outs for cable routing
  • Area for cable ties