Certificates
Certification:
FCC Part 15 Class A, CE
Certification
Certification:
FCC Part 15 Class A, CE
Features
International Protection (IP) code:The IP code classifies and rates the degree of protection provided against the intrusion (including body parts such as hands and fingers), dust, accidental contact, and water by mechanical casings and electrical enclosures. It is published by the International Electrotechnical Commission (IEC). The digits (characteristic numerals) indicate conformity with the conditions summarized in the tables below. Where there is no protection rating with regard to one of the criteria, the digit is replaced with the letter X. an electrical socket rated IP22 is protected against insertion of fingers and will not be damaged or become unsafe during a specified test in which it is exposed to vertically or nearly vertically dripping water. Another example is the Sony Xperia Z Ultra, one of the first cellular phones to be IP-rated; it is rated at IP58 and marketed as "dust resistant" and can be "immersed in 1.5 meter of freshwater for up to 30 minutes".
IP30
LED indicators:
Power, System
Internal:The product is built in.
Logistics data
Harmonized System (HS) code:
85176990
Network
Cable types supported:
Cat3, Cat4, Cat5, Cat5e, Cat6
Duplex system:A duplex communication system is a point-to-point system composed of two connected parties or devices that can communicate with one another in both directions, simultaneously.
Full, Half
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Ethernet LAN data rates:The different speed levels of the Ethernet LAN connection.
10,100,1000 Mbit/s
Ethernet interface type:
Gigabit Ethernet
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Converter output interface:
1000Base-BX, 1000Base-LX, 1000Base-SX
Converter input interface:A convertor changes one form of signal into another e.g. A/D Converter changes a signal from analog to digital. A convertor input interface is the place where a convertor connects to the product in order to input the converted signal.
10Base-T, 100Base-T, 1000Base-SX, 1000Base-T
Maximum data transfer rate:
1000 Mbit/s
Networking
Cable types supported:
Cat3, Cat4, Cat5, Cat5e, Cat6
Duplex system:A duplex communication system is a point-to-point system composed of two connected parties or devices that can communicate with one another in both directions, simultaneously.
Full, Half
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Ethernet LAN data rates:The different speed levels of the Ethernet LAN connection.
10,100,1000 Mbit/s
Ethernet interface type:
Gigabit Ethernet
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Converter output interface:
1000Base-BX, 1000Base-LX, 1000Base-SX
Converter input interface:A convertor changes one form of signal into another e.g. A/D Converter changes a signal from analog to digital. A convertor input interface is the place where a convertor connects to the product in order to input the converted signal.
10Base-T, 100Base-T, 1000Base-SX, 1000Base-T
Maximum data transfer rate:
1000 Mbit/s
Operational conditions
Storage relative humidity (H-H):
5 - 90%
Operating relative humidity (H-H):
5 - 90%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 85 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
-40 - 75 °C
Performance
Fiber mode structure:
Multi-mode, Single-mode
Maximum transfer distance:The greatest distance over which the data/signal can be transferred.
100 m
Ports & interfaces
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
SFP
Fiber ports quantity:The number of sockets (ports) for fibers (cables).
1
Ethernet LAN (RJ-45) ports:Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device. Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.
1
Connectivity technology:
Wired
Power
Input voltage:The voltage (V) which is required to power the product.
9 - 48 V
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
221 g
Height:The measurement of the product from head to foot or from base to top.
104 mm
Depth:The distance from the front to the back of something.
70 mm
Width:The measurement or extent of something from side to side.
30 mm
