Main product

Overview


Combining cooling performance and affordability, the Kolink Observatory Lite Mesh Midi-Tower is a perfect mix of features and functionality. With no less than 4 ARGB LED 120mm fans included as standard, controlled with a supplied remote which allows a variety of modes, lighting options and even speed control, the Observatory Lite Mesh also has a fully mesh front panel for superior airflow capabilities. The hardware you choose to install is also key; the tempered glass side panel allows you to create a showstopping system build. All in all the Observatory Lite Mesh is an extremely feature filled chassis with plenty to offer.

Kolink Observatory Lite Mesh: Airflow where it matters
The digitally addressable RGB-LED fans, 4 of which are preinstalled, are controlled by the supplied remote & RGB hub. Alternatively, the fans can be hooked up and controlled using a compatible motherboard thanks to its use of a standard 3-pin (5VDG) connector. The tempered glass side panel allows users to enjoy a panoramic view of the lighting used inside the Kolink Observatory Lite Mesh.

Aside from the pre-installed fans, users are also free to install two more 120mm fans in the roof. This is where a magnetic dust filter can be found installed on the honeycomb-style mesh. The full mesh front panel and air inlets in the PSU shroud also contribute to the excellent airflow of the case. Users are also free to install a 280 mm radiator in the front.

The Kolink Observatory Lite Mesh: Hardware focused
The interior comes entirely in black, with a PSU shroud that only adds to the sleek and unobtrusive look. Behind the shroud is where users will find space for a pair of 3.5" HDD's in the HDD cage provided, which also has anti-vibration mountings. Alternatively, 2.5" SSD's can be installed here, or next to the motherboard. The motherboard tray and PSU shroud both offer numerous openings for optimum cable management, with up to 30mm cable management space. Underneath the case is a removable dust filter appropriate to an ATX-form factor PSU, which can itself be up to 18 cm in length.

Graphics cards can be up to 33.5cm long (31cm if mounting an AIO) and CPU coolers up to 16 cm tall. Additionally, the I/O panel located at the front possesses two USB 2.0 ports as well as an USB 3.0 Type-A port.




At-a-glance


  • Designed for ATX-/Micro-ATX-/Mini-ITX motherboards

  • Full mesh front panel with 3 x pre-installed 120mm ARGB LED fans

  • Graphics cards up to 335 mm supported, CPU coolers up to 160 mm, PSUs up to 180 mm

  • I/O Panel with 1x USB 3.0 & 2x USB 2.0, HD Audio, RGB-LED controller

  • Option to sync to motherboard software provided as standard

  • Pre-installed rear 120mm fan with digitally addressable RGB lighting

  • PSU shroud with air inlets for a cleaner look

  • RGB controller hub with remote control allowing various lighting modes & effects, plus fan speed control

  • Support for radiators up to 280mm in the front

  • Tempered glass side panel for unobstructed view of the interior




Reasons to buy

  • Designed for ATX-/Micro-ATX-/Mini-ITX motherboards
  • Full mesh front panel with 3 x pre-installed 120mm ARGB LED fans
  • Graphics cards up to 335 mm supported, CPU coolers up to 160 mm, PSUs up to 180 mm
  • I/O Panel with 1x USB 3.0 & 2x USB 2.0, HD Audio, RGB-LED controller
  • Option to sync to motherboard software provided as standard
  • Pre-installed rear 120mm fan with digitally addressable RGB lighting
  • PSU shroud with air inlets for a cleaner look
  • RGB controller hub with remote control allowing various lighting modes & effects, plus fan speed control
  • Support for radiators up to 280mm in the front
  • Tempered glass side panel for unobstructed view of the interior

Specification

Technical Description: Kolink Observatory Lite Mesh Midi Tower Black
Cooling
Front radiator sizes supported:
280 mm
Top fans diameters supported:
120 mm
Number of top fans supported (max):
2
Rear fans diameters supported:
120 mm
Number of rear fans supported (max):
1
Rear fans installed:
1x 120 mm
Front fans diameters supported:
120 mm
Number of front fans supported (max):
3
Front fans installed:
3x 120 mm

Design
Maximum PSU length:
18 cm
Maximum graphics card length:
33.5 cm
Maximum CPU cooler height:
16 cm
LED indicators:
Yes
On/off button:
Yes
Reset button:
Yes
RGB control button:
Yes
Anti-dust filter:
Yes
Tempered glass panel(s):
Yes
Side window:A side window is a transparent side (or part of side) in a housing which enables you to see the internal space of the device.
Yes
Number of expansion slots:
7
Number of internal 3.5" bays:
2
Number of 2.5" bays:
3
Number of 3.5" bays:A drive bay is a standard-area for adding hardware to a computer. Most drive bays are fixed to the inside of a case, but some can be removed. A 3.5" drive bay is for floppy disks.
0
Number of 5.25" bays:A drive bay is a standard-area for adding hardware to a computer. Most drive bays are fixed to the inside of a case, but some can be removed. A 5.25" drive bay, also known as full-height bays, were found in old PCs in the early to mid-1980s. They were 3¼″ high by 5¾″ wide, and up to 8″ deep (83 × 146 × 200 mm), used mainly for hard disks and floppy disk drives.
0
Supported motherboard form factors:Design of the supported motherboards.
ATX, micro ATX, Mini-ITX
Product colour:
Black
Material:The material from which a thing is or can be made e.g. wood, plastic.
Mesh, Plastic, Steel, Tempered glass
Type:Characteristics of the device.
PC
Form factor:The shape or design of the product.
Midi Tower

Packaging data
Package height:The distance from the top to the bottom of the packaging.
498 mm
Package depth:The distance from the front to the back of the packaging.
440 mm
Package width:The distance from one side of the packaging to the other.
258 mm

Ports & interfaces
Audio output:The type of audio output that the device produces, and the connector(s).
Yes
Audio input:The type of audio input that the device requires, and the connection needed.
Yes
USB 3.2 Gen 2 (3.1 Gen 2) Type-C ports quantity:
0
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity:
1
USB 2.0 ports quantity:Number of USB 2.0 ports (connecting interfaces) in the device. USB 2.0 was released in April 2000 (now called "Hi-Speed"), adding higher maximum signaling rate of 480 Mbit/s (effective throughput up to 35 MB/s or 280 Mbit/s), USB 2.0 ports are usually black.
2

Power supply
Power supply location:Where the power supply is positioned.
Bottom
Power supply included:There is a power supply with this product.
No

Storage
Supported HDD sizes:
2.5,3.5"

Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
5.5 kg
Height:The measurement of the product from head to foot or from base to top.
440 mm
Depth:The distance from the front to the back of something.
400 mm
Width:The measurement or extent of something from side to side.
190 mm

Product details

OBSERVATORY LITE MESH Kolink 5999094003491

Kolink Observatory Lite Mesh Midi Tower Black

£68.36 and In stock

SKU: OBSERVATORY LITE MESH

Kolink Observatory Lite Mesh Midi Tower Black

Quick Code: Q3103402 MPN: OBSERVATORY LITE MESH

You need to be logged in to see Prices

Log In For Prices
Dont have an account? Contact Us

Key Features

  • Designed for ATX-/Micro-ATX-/Mini-ITX motherboards
  • Support for radiators up to 280mm in the front
  • PSU shroud with air inlets for a cleaner look